APS:- AP200 Aluminium Doors

AP200 polyamide door range is designed with the architect and their client in mind.

It has a high specification that meets all requirements of a modern thermal efficient door system. It is fully compatible with the AP100 window system. Integral polyamide thermal break sections between inner and outer frames provide the U values required for modern energy efficient buildings in the commercial and residential market.


  • The door system is designed to comply with current UK legislation
  • Air permeability BS 6375: Pt1: 2009 600 Pa
  • Water tightness BS 6375: Pt1: 2009 600 Pa
  • Wind resistance BS 6375: Pt1: 2009 2400 Pa + 3600 Pa
  • Enhanced Security - PAS24

Materials & Finishes

Aluminium alloy 6063 T5 and T6 complying with the recommendations of BS 1559. Polyamide thermal break sections. Polyester powder coated finish to BS6496 thickness 60 microns. There are over 400 RAL or BS colours in gloss, satin or matt finish. Dual colour option is also achievable.


All frame and opening profiles are mitre cut with crimped extruded aluminium corner cleats. Intermediate bars are square cut & butt jointed to frame profiles with extruded aluminium ‘T’ cleats.

Ironmongery & Fittings

A full range of recommended ironmongery is available ‘off the shelf’ at APS including multi-point locking gear operated by lever handles, shoot bolts, butt or surface hinges, electric strikes and full range of emergency exit gear.


The door system is designed to accommodate 28mm and 30mm double glazing and 42mm and 44mm triple glazing, internally or externally glazed. As well as glass, spandrel panels and aluminium panels may be used.

Aluminium doorAluminium doorsAluminium double doorAluminium double doorsCommercial aluminium doorsCommercial doorCommercial doorsCommerical aluminium door